Collaborative study - Titrimetric determination of carbon dioxide in sparkling and semi-sparkling wines

Статус: в силе

Collaborative study - Titrimetric determination of carbon dioxide in sparkling and semi-sparkling wines

RESOLUTION  OENO 3/2006

COLLABORATIVE STUDY - TITRIMETRIC DETERMINATION OF CARBON DIOXIDE IN SPARKLING AND SEMI-SPARKLING WINES

THE GENERAL ASSEMBLY,

CONSIDERING Article 2 paragraph 2 iv of the Agreement establishing the International Organisation of Vine and Wine,

UPON THE PROPOSAL of the Sub-commission of Methods of Analysis and Appraisal of Wine,

DECIDES to complete the method of determination of CO2 in the Compendium of international methods of analysis of wines and musts by the following results concerning the validation study and to modify the method in Type II method in the range of concentration up to 1.5 g/l

Collaborative Study - Titrimetric determination of carbon dioxide in sparkling and semi-sparkling wines - Report on Results

1.      Goal of the study

The objective of the study is to determine the repeatability and reproducibility characteristics of the reference method (MA-E-AS314-01-DIOCAR) for the titrimetric CO2 determination in sparkling and semi-sparkling wine.

O.I.V. definitions and limits for the CO2 content are given with resolution OENO 1/2002.

2.      Needs and purpose of the study

The reference method for the determination  includes no precision data. This collaborative trial was thus conducted.

Due to the analytical particularity, theconventional validation protocol was not able to be completely respected. Out of one bottle of sample only one independent determination could be done. Each bottle had to be considered as  individual. Therefore homogeneity testing within the pre-investigations for collaborative studies was impossible. In order to provide homogenous test material close co-operation with producers was necessary. Samples were obtained during the filling of the bottles on the filling line in a very short time space, thus that it must be assumed that the is homogeneously distributed in all bottles.

This study was designed to be a blind duplicate test. The complete anonymity of the samples could not be guaranteed because the partners involved used different types of bottles and/or stoppers for the different samples. Therefore we had to rely on the honesty of the participating laboratories which were requested to perform the data analysis independently without any data modification.

3.      Scope and applicability

  1. The method is quantitative.
  2. The method is applicable for the determination of in sparkling and semi-sparkling wines to check that standards are respected.

4.      Materials and matrices

The collaborative study included 6 different samples. All were sent in blind duplicate, so that in total 12 bottles were distributed to the participants.

Table 1. Samples and coding.

Sample

Bottle Code

Type

SAMPLE A

(Code 1 + 9)

sparkling wine

SAMPLE B

(Code 2 + 5)

semi-sparkling wine (“petillant”)

SAMPLE C

(Code 3 + 4)

sparkling wine

SAMPLE D

(Code 6 + 10)

semi- sparkling wine (“petillant”)

SAMPLE E

(Code 7 + 11)

semi- sparkling wine (“petillant”)

SAMPLE F

(Code 8 + 12)

sparkling wine (red)

5.      Control measures

The method considered is already approved in practice. Only the missing precision data had to be determined within the collaborative study. A pre-trial was not required because most of the laboratories had been already using the reference method in routine analysis.

6.      Method to be followed and supporting documents

Supporting documents were given to the participants (Covering letter Reference for method of analysis, Sample Receipt Form and Result Sheet).

The determination of content in g/l should be expressed in g/l.

7.      Data analysis

  1. Determination of outliers was assessed by Cochran, Grubbs and paired Grubbs tests.
  2. Statistical analysis was performed to obtain repeatability and reproducibility data.
  3. HORRAT values were calculated.

8.      Participants

13 laboratories from several different countries participated in the collaborative study. Lab-Code numbers were given to the laboratories. The participating laboratories have proven experience in the analysis of in sparkling wine.

Table 2. List of participants.

Landesuntersuchungsamt

D-56068 Koblenz

GERMANY

Institut für Lebensmittelchemie und Arzneimittelprüfung

D-55129 Mainz

GERMANY

Landesuntersuchungsamt

D-67346 Speyer

GERMANY

Institut für Lebensmittel, Arzneimittel und Tierseuchen

D-10557 BERLIN

GERMANY

Servicio Central de Viticultura y Enologia

E-08720 Villafranca Del Pendes

SPAIN

Landesuntersuchungsamt

D-54295 Trier

GERMANY

Landesuntersuchungsamt

D-85764 Oberschleißheim

GERMANY

Instituto Agrario di S. Michele

I-38010 S. Michele all Adige

ITALIA

Chemisches Landes- u. Staatl.

Veterinäruntersuchungsamt

D-48151 Münster

GERMANY

Ispettorato Centrale Repressione Frodi

I-31015 Conegliano (Treviso)

ITALY

Bundesamt für Weinbau

A-7000 Eisenstadt

AUTRIA

BgVV

D-14195 Berlin

GERMANY

Chemisches und Veterinäruntersuchungsamt

D-70736 Fellbach

GERMANY

 

9.      Results

The uncertainty data are directly calculated for the determination from the results submitted. For the assessment of the collaborative trial the Horrat-ratio is of relevance. For all samples a ratio of < 2 was obtained for r and R, convincing for a collaborative study. Table 3 shows the results of the titration for each sample.

Table 3. Summarised results of the determination.

CO2

SAMPLE A

SAMPLE B

SAMPLE C

SAMPLE D

SAMPLE E

SAMPLE F

Mean [g/l]

9.401

3.344

9.328

4.382

4.645

8.642

 

           

r [g/l]

0.626

0.180

0.560

0.407

0.365

0.327

sr [g/l]

0.224

0.064

0.200

0.145

0.130

0.117

RSDr %

2.379

1.921

2.145

3.314

2.803

1.352

Hor

0.893

0.617

0.804

1.109

0.946

0.501

 

           

R [g/l]

1.323

0.588

0.768

0.888

0.999

0.718

sR [g/l]

0.473

0.210

0.274

0.317

0.357

0.256

RSDR %

5.028

6.276

2.942

7.239

7.680

2.967

HoR

1.245

1.331

0.728

1.599

1.711

0.726